On Board Diagnostics for Your Engine
January 27, 2019
Starting in 1996, Blair's Ferry Automotive service technicians have been able to use a standardized diagnostic system to help determine what is wrong with a vehicle. This diagnostic system works in tandem with the Engine Control Modules for each vehicle's engine. The Engine Control Module is a computer that monitors and controls many engine functions.
Sensors throughout a vehicle send readings to the Engine Control Module. These readings help the computer make adjustments in various vehicle systems to allow for constantly changing driving conditions and even to compensate for minor problems. However, if the computer encounters a situation it can't adjust for, it turns on the Check Engine light. (The Check Engine light is called the “service engine soon” light on some vehicles.)
If the Check Engine light is burning steadily, it indicates a problem that needs to be taken care of soon. If it is flashing, however, the vehicle needs immediate attention at Blair's Ferry Automotive. When the Check Engine light is flashing, the vehicle should not be driven at high speeds, haul heavy loads or tow a trailer. Marion drivers need to understand that doing so can cause major damage.
When a vehicle is brought to Blair's Ferry Automotive in Marion because the Check Engine light is on, a technician will scan the Engine Control Module to learn why it turned the light on. The answer comes as a “trouble code.” The technician has access to software that allows him to enter the code and find out what it means. The software will also let your Blair's Ferry Automotive technician know what might be causing the problem and how to diagnose it.
Notice that the trouble code does not tell your technician at Blair's Ferry Automotive exactly what is wrong with the vehicle. It can only let him know where to start looking to find the problem.
Scanning a trouble code and determining what it means is fairly simple for the pros at Blair's Ferry Automotive. But the ensuing process of actually diagnosing a vehicle's trouble can take a skilled technician some time. Sometimes this can add up to a significant repair bill. Some vehicle owners mistakenly believe that the “trouble code” is all they need and think they can then fix their vehicles themselves. Some have tried to save money by purchasing an inexpensive scanner, or they take their vehicles to an auto parts store that offers the scan for little or no cost.
These options are often not the money-savers they seem for Marion vehicle owners. They can end up costing the vehicle owner extra in unnecessary repairs and engine damage.
For example, the trouble code P0133 reads “Bank 1 sensor 1 circuit slow response.” Translated, that means the front oxygen sensor shows a slow response time in changing the mix of air to fuel. The seemingly obvious conclusion is that the sensor needs to be replaced. The vehicle owner purchases a sensor, installs it and happily goes on his way.
However, read the trouble again: a slow response time in changing the mix of air to fuel. Nowhere does this indicate that the sensor is bad. There are a lot of parts involved in changing the air-fuel mix, any of which could be causing a slow reaction time. Those include a bad or contaminated airflow sensor, an exhaust leak, a problem in the electrical system or a leak in the intake manifold. The sensor is merely relaying that the response time is slow; it doesn't indicate where the trouble is.
So the vehicle ends up with an oxygen sensor it did not need, and the delay in repairing the actual problem may have led to further damage to the engine. Both are added costs for the vehicle owner.
Cheap scanners also don't have the ability to read the history stored in an engine's computer. This operating history contains clues that can help in diagnosing engine trouble since it can indicate a developing problem. Blair's Ferry Automotive invests a lot of money in high-end diagnostic equipment so that we have access not just to service codes but also to the operating history of the engine.
On-board diagnostics, then, are a tool to help diagnose what is wrong with a vehicle. They cannot specify what part needs to be fixed or replaced, and they cannot replace a well-trained and well-equipped service technician.
Unless you are a trained mechanic, it's good auto advice to use Blair's Ferry Automotive for your car care. In the long run, it can save you time, unnecessary expense and frustration. Blair's Ferry Automotive can also help you keep up with your scheduled preventive maintenance, which can also save you on repair bills by alerting you to potential problems before they get expensive.
Blair's Ferry Automotive
1565 Blairs Ferry Rd.
Marion, Iowa 52302
319-447-6310
http://www.blairsferryautomotive.com
Need Service?
More articles from Blairs Ferry Automotive

Beware of Potholes! (Avoiding Pothole Damage)
March 9, 2025
You may live in a region where roads become pockmarked with craters known better as potholes. They're caused by moisture seeping through a compromised road surface that can freeze, expand and literally punch holes in the road. And when your vehicle hits one of those holes that's big enough, the... More

Losing Your Spark (Spark Plug Replacement)
March 2, 2025
When's the last time you thought about spark plugs? You probably don't remember. That's because spark plugs usually last a long time and don't need much attention. But they don't last forever, and when they start going bad, they'll send you a few clues. Vehicle is hard to start. Fuel economy ... More

The Turn Signal Mystery (Turn Signal Problems)
February 23, 2025
Some problems are easy to diagnose on a vehicle; others aren't. Figuring out what's wrong with a malfunctioning turn signal sometimes fits into both categories. By the way, if your tempted to just leave your broken blinker broken, remember you can get a ticket for not using them, not to mention... More